• 12336 Emerson Dr, Brighton, MI 48116

Carpet Stain Remover 4285

CarpetGeneralĀ® Carpet Stain Remover4285 is a heavy-duty water based preconditioned, cleaner and degreaser. Its exceptional power will improve any cleaning situation by quickly emulsifying stubborn ground in dirt, grease, soot, fire damage and filtration soil on carpet, hard surfaces or even concrete driveways.

buy-now-blue

SKU: 4285 Category:

Product Description

Carpet Stain Remover 4285

CarpetGeneralĀ® Carpet Stain Remover4285 is a heavy-duty water based preconditioned, cleaner and degreaser. Its exceptional power will improve any cleaning situation by quickly emulsifying stubborn ground in dirt, grease, soot, fire damage and filtration soil on carpet, hard surfaces or even concrete driveways.

TYPICAL PROPERTIES:

  • Appearance: Clear, green liquid
  • Odor:Citrus
  • pH: 13
  • Flash Point:None
  • Wt/Gal:8.9
  • VOC:0.4 lbs/gal (EPA Method 24)

BENEFITS:

  • Water based
  • Widespread utility
  • Low VOC

RECOMMENDED APPLICATION:

Carpet Stain Remover, Carpet Spot Remover, Carpet Pre-Spray
Always pretest an area to be cleaned to insure compatibility with the cleaner. CarpetGeneralĀ® Carpet Stain Remover 4285 can be used as received or diluted with water, depending upon the nature and severity of the soils to be removed. When diluting with water always add the product to water to avoid splashing of the alkaline solution.

FOR CARPETS, UPHOLSTERY, CLOTHES, AND NON-WASHABLES: Spray stained area thoroughly, wait 60 seconds. Agitate to saturate the fibers. Blot or gently rub area with a clean, absorbent cloth. Repeat until stain is removed. Blot any excess moistureno need to vacuum; dries quickly.

FOR REAPPEARING STAINS: Repeat above steps, then place a clean, white cloth or paper towel over the treated area, followed by something flat and heavy like a stack of books. After a few hours, the towel absorbs any excess stain residue and moisture that wicks to the top.

FOR WASHABLES: Spray stain thoroughly and wait 60 seconds. Agitate to saturate the fibers. Launder as fabric recommendations allow. Repeat if necessary.

FOR WALLS, COUNTERTOPS, FLOORS, AND TILE: Spray stain thoroughly, wait 60 seconds. Wipe with a clean cloth or rinse thoroughly. Repeat if necessary.

Please refer to the MSDS for proper safety instructions.

 

MATERIAL COMPATIBILITY:
Avoid strong oxidizing agents (i.e. bleach), strong bases (i.e. ammonia) and soft metals such as aluminum at elevated temperatures.