CarpetGeneral® Carpet Degreaser 5673
CarpetGeneral® Carpet Degreaser 5673 is a powerful carpet degreaser that is a great industrial and commercial cleaner for the most stubborn stains.
Dilution Ratio of 1 parts product to 8 parts water. Make 8 Gallons!
CarpetGeneral® Carpet Degreaser 5673 is used for severely soiled areas where CarpetGeneral ® Carpet Stain Remover 4285 may not be quite enough. Its exceptional power will improve any cleaning situation by quickly emulsifying stubborn ground in dirt, grease, soot, fire damage and filtration soil on carpet, hard surfaces or even concrete driveways. This saves on cleaning or rinsing solution creating less waste water, and reduces labor by decreasing the number of passes needed to thoroughly clean.
- Water based
- Widespread utility
- Low VOC
RECOMMENDED APPLICATION: Carpet Stain Remover, Carpet Spot Remover, Carpet Pre-Spray
Always pretest an area to be cleaned to insure compatibility with the cleaner. CarpetGeneral® Carpet Stain Remover 4285 can be used as received or diluted with water, depending upon the nature and severity of the soils to be removed. When diluting with water always add the product to water to avoid splashing of the alkaline solution.
FOR CARPETS, UPHOLSTERY, CLOTHES, AND NON-WASHABLES: Spray stained area thoroughly, wait 60 seconds. Agitate to saturate the fibers. Blot or gently rub area with a clean, absorbent cloth. Repeat until stain is removed. Blot any excess moisture no need to vacuum; dries quickly.
FOR REAPPEARING STAINS: Repeat above steps, then place a clean, white cloth or paper towel over the treated area, followed by something flat and heavy like a stack of books. After a few hours, the towel absorbs any excess stain residue and moisture that wicks to the top.
FOR WASHABLES: Spray stain thoroughly and wait 60 seconds. Agitate to saturate the fibers. Launder as fabric recommendations allow. Repeat if necessary.
FOR WALLS, COUNTERTOPS, FLOORS, AND TILE: Spray stain thoroughly, wait 60 seconds. Wipe with a clean cloth or rinse thoroughly. Repeat if necessary.
Please refer to the MSDS for proper safety instructions.