• 12336 Emerson Dr, Brighton, MI 48116

Introduction: Carpet Stain Remover

Carpet Stain Remover is used for severely soiled areas where Carpet Cleaner may not be quite enough. Its exceptional power will improve any cleaning situation by quickly emulsifying stubborn ground in dirt, grease, soot, fire damage and filtration soil on carpet, hard surfaces or even concrete driveways. This saves on cleaning or rinsing solution creating less waste water, and reduces labor by decreasing the number of passes needed to thoroughly clean.



Through the combination of various cleaning agents, our carpet cleaners and carpet stain removers have been developed to provide rapid emulsification of soils and allow easy removal of a wide variety of carpet and fabric stains. Our carpet cleaners and carpet stain removers can be used as pre-spotters or pre-sprays to improve any cleaning application. In addition, they can also be used as stand alone spot and stain removers.
These multi-purpose cleaners utilize emulsifying surfactants and wetting agents to provide all purpose cleaning and degreasing of hard and soft surfaces. The unique combination of chemical components produces rapid emulsification and allows easy removal of a wide variety of carpet and fabric stains also. They remove a variety of soils from carpet, upholstery and fabric without harming the substrate or leaving an offending odor.

Our carpet cleaners and carpet stain removers are water based formulas or water emulsifiable solvent based formulas that effectively clean dirt, grease, soot, fire damage and filtration soil on carpet hard surfaces and concrete.

Dilution and Application

Once applied properly, this non-toxic, biodegradable solution is specially formulated to rapidly remove grease and dirt stains from a variety of hard and soft surfaces; fabrics and carpet included. It is also formulated for rapid drying after use and leaves no sticky residue. This cleaner can be used to degrease, clean and/or remove spots and stains from the following: walls, vinyl surfaces, floors, tiles, tubs, ceilings, furniture, vents, equipment surfaces, carpets, various fabrics and other surfaces. Solution emulsifies stains caused by spills from food, soda, coffee, wine, kool-aid, oil, etc.

Provides superior soil break up, emulsification, and release. It can be worked into the carpet with a carpet rake or gentle brush. For best results as a pre-spray, follow with hot water extraction cleaning.

Carpet Stain Remover 4285 should be diluted and applied as follows:

Mix or gently agitate the container of Carpet Stain Remover 4285 prior to using.
Apply to carpet with a pump-up sprayer as a pre-spray. Allow at least 5 minutes dwell time on the carpet prior to hot water extraction.
Carpet Stain Remover 4285may also be used with portable or truck mount hot water extraction cleaning units.

Equipment Mix Instructions:

Pre-Spray 8 oz to 1 gal of water
Spot Remover 8 oz to 1 gal of water
Portable Extraction Unit 8 oz to 1 gal of water
Truck Mount Set rotometer at 16:1
mix ratio of water to concentrate.

For general cleaning, spray directly on heavy-duty dirt. Do not dilute. For light-duty cleaning, add 2-4 ounces to 1 quart water. For carpet cleaning, vacuum loose dirt prior to use. Spray entire stain completely. However, do not saturate. Blot gently with a clean, damp, color-fast sponge or cloth. For fabric cleaning, completely cover stain and rub in to penetrate. Launder with regular detergent in warmest water fabric will accept. Re-apply and wash again for tough stains.

For best results, treat stain while fresh and allow cleaner to set 3-5 minutes

Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification

Customer Comments

“I unpacked the chemical samples Sunday and have not been able to use them until today. I want to test them on some really bad apartments I have coming up this week. I will take some before and after pictures and send them to you. I did however use some of the spot remover. I used it to remove some asphalt in the doorway. It has a pleasant smell and does not have that typical heavy chemical smell to it. This is a plus as I hate to come back over a spot and extract it to remove the nasty chemical smell. it did a really nice job of removing the asphalt from the carpet, in fact it dissolved it pretty nice.” – Gary

Benefits to You

  • Powerful citrus solvents
  • Can also be used as a spotter
  • Great for commercial jobs